Sinq Systems

The evolving microstructure and mechanical properties that promote homeostasis within the aorta are elementary to age-specific variations and illness development. We mix ex vivo multiphoton microscopy and biaxial biomechanical phenotyping to quantify and correlate layer-specific microstructural parameters, for the first extracellular matrix parts (fibrillar collagen and elastic lamellae) and cells (endothelial, easy muscle, and adventitial), with mechanical properties of the mouse aorta from weaning by pure getting old as much as one 12 months. The getting old endothelium was characterised by progressive reductions in cell density and altered mobile orientation.

The media equally confirmed a progressive lower in easy muscle cell density and alignment although with inter-lamellar widening from intermediate to older ages, suggesting cell hypertrophy, matrix accumulation, or each. Despite not altering in tissue thickness, the getting old adventitia exhibited a marked thickening and straightening of collagen fiber bundles and discount in cell density, suggestive of age-related reworking not development. Because of the significance of getting old as a danger issue for cardiovascular ailments, understanding the conventional development of structural and purposeful modifications is crucial when evaluating superimposed disease-related modifications as a operate of the age of onset.

Understanding and controlling the dynamics of lively Brownian objects removed from equilibrium are essentially necessary for rising applied sciences akin to synthetic micro/nanomotors for drug deliveries and noninvasive microsurgery.  Here, we report in situ visualization and manipulation of unidirectional superfast ballistic dynamics of a single-photon-activated gold nanoparticle (NP) alongside the liquid-gas interface by four-dimensional electron microscopy (4D EM) at nanometer and nanosecond scales. We noticed that, upon repetitive femtosecond laser excitation, the NP on the liquid-gas interface displays a constantly superfast unidirectional translation with a linear dependence of its root imply squared velocity (ν_rms) on both the laser fluence or repetition charge.

Photonic resonator interferometric scattering microscopy

Interferometric scattering microscopy is more and more employed in biomedical analysis owing to its extraordinary functionality of detecting nano-objects individually by their intrinsic elastic scattering. To considerably enhance the signal-to-noise ratio with out rising illumination depth, we developed photonic resonator interferometric scattering microscopy (PRISM) during which a dielectric photonic crystal (PC) resonator is utilized because the pattern substrate. The scattered mild is amplified by the PC by resonant near-field enhancement, which then interferes with the <1% transmitted mild to create a big depth distinction.

Importantly, the scattered photons assume the wavevectors delineated by PC’s photonic band construction, ensuing within the capability to make the most of a non-immersion goal with out important loss at illumination density as little as 25 W cm^-2. An analytical mannequin of the scattering course of is mentioned, adopted by demonstration of virus and protein detection. The outcomes showcase the promise of nanophotonic surfaces within the growth of resonance-enhanced interferometric microscopies. Super-resolution microscopy and single molecule fluorescence spectroscopy require mutually unique experimental methods optimizing both temporal or spatial decision.

To obtain each, we implement a GPU-supported, camera-based measurement technique that extremely resolves spatial buildings (~100 nm), temporal dynamics (~2 ms), and molecular brightness from the very same information set. Simultaneous super-resolution of spatial and temporal particulars results in an improved precision in estimating the diffusion coefficient of the actin binding polypeptide Lifeact and corrects structural artefacts. Multi-parametric evaluation of epidermal development issue receptor (EGFR) and Lifeact means that the area partitioning of EGFR is primarily decided by EGFR-membrane interactions, probably sub-resolution clustering and inter-EGFR interactions however is basically impartial of EGFR-actin interactions.

These outcomes reveal that pixel-wise cross-correlation of parameters obtained from totally different strategies on the identical information set allows strong physicochemical parameter estimation and offers organic information that can not be obtained from sequential measurements. However, direct statement and management of unidirectional propulsion of particular person nanoscale objects are technically difficult because of the required spatiotemporal decision. Multiple microstructural modifications correlated with age-related will increase in circumferential and axial materials stiffness, amongst different mechanical metrics.

MR-Eye: High-Resolution Microscopy Coil MRI for the Assessment of the Orbit and Periorbital Structures, Part 2: Clinical Applications

In the primary a part of this 2-part sequence, we described find out how to implement microscopy coil MR imaging of the orbits. Beyond being a helpful anatomic instructional instrument, microscopy coil MR imaging has beneficial purposes in scientific apply. By depicting deep tissue tumor extension, which can’t be evaluated clinically, ophthalmic surgeons can reduce the surgical discipline, protect regular anatomy when attainable, and maximize the accuracy of resection margins. Here we reveal frequent and unusual pathologies that could be encountered in orbital microscopy coil MR imaging apply and talk about the imaging look, the underlying pathologic processes, and the scientific relevance of the microscopy coil MR imaging findings.

Tuning the composition of regenerated lignocellulosic fibers within the manufacturing course of allows focusing on of particular materials properties. In composite supplies, such properties may very well be manipulated by managed heterogeneous distribution of chemical parts of regenerated fibers. This attribute requires a visualization methodology to indicate their inherent chemical traits. We in contrast complementary microscopic strategies to research the floor chemistry of 4 in another way tuned regenerated lignocellulosic fibers.

Curcumin
GP8291-1G	Glentham Life Sciences	1 g	EUR 41

Curcumin
GP8291-25G	Glentham Life Sciences	25 g	EUR 74

Curcumin
GP8291-50G	Glentham Life Sciences	50 g	EUR 102

Curcumin
GP8291-5G	Glentham Life Sciences	5 g	EUR 54

Curcumin
TB0283-0500	ChemNorm	4X25mg	EUR 268

Demethoxy curcumin
TBW00424	ChemNorm	20mg	EUR 186

Curcumin, pure, 98%
GP7022-10MG	Glentham Life Sciences	10 mg	EUR 103

Curcumin, pure, 98%
GP7022-250MG	Glentham Life Sciences	250 mg	EUR 390

Curcumin, pure, 98%
GP7022-50MG	Glentham Life Sciences	50 mg	EUR 160

Curcumin, Curcuma longa (High Purity)
1850-10	Biovision		EUR 115

Curcumin, Curcuma longa (High Purity)
1850-50	Biovision		EUR 251

EZClick? Palmitoylated Protein Assay Kit (FACS/Microscopy), Red Fluorescence
K416-100	Biovision		EUR 490

EZClick? Stearoylated Protein Assay Kit (FACS/Microscopy), Red Fluorescence
K418-100	Biovision		EUR 490

EZClick? Palmitoylated Protein Assay Kit (FACS/Microscopy), Green Fluorescence
K452-100	Biovision		EUR 490

EZClick? Stearoylated Protein Assay Kit (FACS/Microscopy), Green Fluorescence
K453-100	Biovision		EUR 490

EZClick? Myristoylated Protein Assay Kit (FACS/Microscopy), Green Fluorescence
K497-100	Biovision		EUR 490

Holder for Plasmid Midi, Maxi and Maxi plus, Ion Exchange column
FAPDE-holder-for-ion-exchange	Favorgen	1 prep	EUR 158

EZClick? Global Protein Synthesis Assay Kit (FACS/Microscopy), Green Fluorescence
K459-100	Biovision		EUR 550

EZClick? Global RNA Synthesis Assay Kit (FACS/Microscopy), Red Fluorescence
K462-100	Biovision		EUR 533

EZClick? Global Protein Synthesis Assay Kit (FACS/Microscopy), Red Fluorescence
K715-100	Biovision		EUR 550

EZClick? Global Phospholipid Synthesis Assay Kit (FACS/Microscopy), Red Fluorescence
K717-100	Biovision		EUR 512

EZClick? Global RNA Synthesis Assay Kit (FACS/Microscopy), Red Fluorescence
K718-100	Biovision		EUR 533

EZClick? O-GalNAc Modified Glycoprotein Assay Kit (FACS/Microscopy, Green Fluorescence)
K560-100	Biovision		EUR 490

EZClickTM Fucose (FucAz) Modified Glycoprotein Assay Kit (FACS/Microscopy, Green Fluorescence)
K592-100	Biovision		EUR 490

EZClick? O-GlcNAc Modified Glycoprotein Assay Kit (FACS/Microscopy, Green Fluorescence)
K714-100	Biovision		EUR 512

EZClick? EdU Cell Proliferation/DNA Synthesis Kit (FACS/Microscopy), Red Fluorescence
K946-100	Biovision		EUR 533

EZClick? Sialic Acid (ManAz) Modified Glycoprotein Assay Kit (FACS/Microscopy, Green Fluorescence)
K441-100	Biovision		EUR 490

Adaptor for flexible plates, accessory for AgileSealer?
APS-200-FP	ACTGene		EUR 351

Sample comb for batching for AE-6110
2398313	Atto	unit	EUR 100
Description: (90mm・r efer ence at t ached・1.5mm t i ck ness)

gelcaster for sequencer
ESEQ1000-CAST	Consort	ea	EUR 437

Stand for D1000
BCM1237	Bio Basic	1 pcs, 1 UNIT	EUR 556.7

For-Ala-OH
5-02335	CHI Scientific	25g	Ask for price

For-Ala-OH
5-02336	CHI Scientific	100g	Ask for price

For-Val-OH
5-03697	CHI Scientific	25g	Ask for price

For-Val-OH
5-03698	CHI Scientific	100g	Ask for price

Antibody for CD9
SPC-1272D	Stressmarq	0.1ml	EUR 314
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is unconjugated.

Antibody for CD9
SPC-1272D-A390	Stressmarq	0.1ml	EUR 361
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 390.

Antibody for CD9
SPC-1272D-A488	Stressmarq	0.1ml	EUR 360
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 488.

Antibody for CD9
SPC-1272D-A565	Stressmarq	0.1ml	EUR 360
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 565.

Antibody for CD9
SPC-1272D-A594	Stressmarq	0.1ml	EUR 360
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 594.

Antibody for CD9
SPC-1272D-A633	Stressmarq	0.1ml	EUR 360
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 633.

Antibody for CD9
SPC-1272D-A655	Stressmarq	0.1ml	EUR 360
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 655.

Antibody for CD9
SPC-1272D-A680	Stressmarq	0.1ml	EUR 360
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 680.

Antibody for CD9
SPC-1272D-A700	Stressmarq	0.1ml	EUR 360
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 700.

Antibody for CD9
SPC-1272D-ALP	Stressmarq	0.1ml	EUR 355
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Alkaline Phosphatase.

Antibody for CD9
SPC-1272D-APC	Stressmarq	0.1ml	EUR 359
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to APC .

Antibody for CD9
SPC-1272D-APCCY7	Stressmarq	0.1ml	EUR 432
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to APC/Cy7.

Antibody for CD9
SPC-1272D-BI	Stressmarq	0.1ml	EUR 357
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Biotin.

Antibody for CD9
SPC-1272D-DY350	Stressmarq	0.1ml	EUR 436
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Dylight 350.

Antibody for CD9
SPC-1272D-DY405	Stressmarq	0.1ml	EUR 412
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Dylight 405.

Antibody for CD9
SPC-1272D-DY488	Stressmarq	0.1ml	EUR 393
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Dylight 488.

Antibody for CD9
SPC-1272D-DY594	Stressmarq	0.1ml	EUR 397
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Dylight 594.

Antibody for CD9
SPC-1272D-DY633	Stressmarq	0.1ml	EUR 387
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Dylight 633.

Antibody for CD9
SPC-1272D-FITC	Stressmarq	0.1ml	EUR 353
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to FITC.

Antibody for CD9
SPC-1272D-HRP	Stressmarq	0.1ml	EUR 349
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to HRP.

Antibody for CD9
SPC-1272D-P594	Stressmarq	0.1ml	EUR 367
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to PE/ATTO 594.

Antibody for CD9
SPC-1272D-PCP	Stressmarq	0.1ml	EUR 359
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to PerCP.

Antibody for CD9
SPC-1272D-RPE	Stressmarq	0.1ml	EUR 358
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to RPE .

Antibody for CD9
SPC-1272D-STR	Stressmarq	0.1ml	EUR 359
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Streptavidin.

Antibody for KDEL
SPC-109A	Stressmarq	0.05mg	EUR 205
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is unconjugated.

Antibody for KDEL
SPC-109B	Stressmarq	0.2mg	EUR 350
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is unconjugated.

Antibody for KDEL
SPC-109B-A390	Stressmarq	0.2mg	EUR 439
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 390.

Antibody for KDEL
SPC-109B-A488	Stressmarq	0.2mg	EUR 436
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 488.

Antibody for KDEL
SPC-109B-A565	Stressmarq	0.2mg	EUR 436
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 565.

Antibody for KDEL
SPC-109B-A594	Stressmarq	0.2mg	EUR 436
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 594.

Antibody for KDEL
SPC-109B-A633	Stressmarq	0.2mg	EUR 436
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 633.

Antibody for KDEL
SPC-109B-A655	Stressmarq	0.2mg	EUR 436
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 655.

Antibody for KDEL
SPC-109B-A680	Stressmarq	0.2mg	EUR 436
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 680.

Antibody for KDEL
SPC-109B-A700	Stressmarq	0.2mg	EUR 436
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 700.

Antibody for KDEL
SPC-109B-ALP	Stressmarq	0.2mg	EUR 425
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to Alkaline Phosphatase.

Antibody for KDEL
SPC-109B-APC	Stressmarq	0.2mg	EUR 435
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to APC .

Antibody for KDEL
SPC-109B-APCCY7	Stressmarq	0.2mg	EUR 585
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to APC/Cy7.

Antibody for KDEL
SPC-109B-BI	Stressmarq	0.2mg	EUR 427
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to Biotin.

Antibody for KDEL
SPC-109B-DY350	Stressmarq	0.2mg	EUR 471
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to Dylight 350.

Antibody for KDEL
SPC-109B-DY405	Stressmarq	0.2mg	EUR 448
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to Dylight 405.

Antibody for KDEL
SPC-109B-DY488	Stressmarq	0.2mg	EUR 428
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to Dylight 488.

Antibody for KDEL
SPC-109B-DY594	Stressmarq	0.2mg	EUR 432
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to Dylight 594.

Antibody for KDEL
SPC-109B-DY633	Stressmarq	0.2mg	EUR 422
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to Dylight 633.

Antibody for KDEL
SPC-109B-FITC	Stressmarq	0.2mg	EUR 420
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to FITC.

Antibody for KDEL
SPC-109B-HRP	Stressmarq	0.2mg	EUR 414
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to HRP.

Antibody for KDEL
SPC-109B-P594	Stressmarq	0.2mg	EUR 447
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to PE/ATTO 594.

Antibody for KDEL
SPC-109B-PCP	Stressmarq	0.2mg	EUR 435
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to PerCP.

Antibody for KDEL
SPC-109B-RPE	Stressmarq	0.2mg	EUR 429
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to RPE .

Antibody for KDEL
SPC-109B-STR	Stressmarq	0.2mg	EUR 432
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to Streptavidin.

Antibody for KDEL
SPC-109S	Stressmarq	0.012mg	EUR 65
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is unconjugated.

Antibody for Phosphoserine
SPC-149F	Stressmarq	0.4ml	EUR 362
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is unconjugated.

Antibody for Phosphoserine
SPC-149F-A390	Stressmarq	0.4ml	EUR 409
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to ATTO 390.

Antibody for Phosphoserine
SPC-149F-A488	Stressmarq	0.4ml	EUR 408
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to ATTO 488.

Antibody for Phosphoserine
SPC-149F-A565	Stressmarq	0.4ml	EUR 408
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to ATTO 565.

Antibody for Phosphoserine
SPC-149F-A594	Stressmarq	0.4ml	EUR 408
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to ATTO 594.

Antibody for Phosphoserine
SPC-149F-A633	Stressmarq	0.4ml	EUR 408
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to ATTO 633.

Antibody for Phosphoserine
SPC-149F-A655	Stressmarq	0.4ml	EUR 408
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to ATTO 655.

Antibody for Phosphoserine
SPC-149F-A680	Stressmarq	0.4ml	EUR 408
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to ATTO 680.

Antibody for Phosphoserine
SPC-149F-A700	Stressmarq	0.4ml	EUR 408
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to ATTO 700.

×

Adhesion properties have been visualized with chemical drive microscopy and confirmed contrasts in the direction of hydrophilic and hydrophobic atomic drive microscopy ideas. Fibers containing xylan confirmed heterogeneous adhesion properties throughout the fiber construction in the direction of hydrophilic ideas. Additionally, peak drive infrared microscopy mapped spectroscopic contrasts with nanometer decision and supplied level infrared spectra, which have been constant to classical infrared microscopy information. With this setup, infrared indicators with a spatial decision beneath 20 nm reveal chemical gradients in particular fiber varieties.