Moiré superlattices in van der Waals heterostructures are gaining rising consideration as a result of they provide new alternatives to tailor and discover distinctive digital phenomena. Using a mix of lateral piezoresponse drive microscopy (LPFM) and scanning Kelvin probe microscopy (SKPM), we instantly correlate ABAB and ABCA stacked graphene with native floor potential. We discover that the floor potential of the ABCA domains is ∼15 mV increased (smaller work perform) than that of the ABAB domains. First-principles calculations present that the completely different work features between ABCA and ABAB domains come up from the stacking-dependent digital construction.
Moreover, whereas the moiré superlattice visualized by LPFM can change with time, imaging the floor potential distribution via SKPM seems extra steady, enabling the mapping of ABAB and ABCA domains with out tip-sample contact-induced results. Our outcomes present a brand new means to visualise and probe native area stacking in moiré superlattices together with its impression on digital properties. Dermoscopic examination revealed 78.6% nevi with a globular sample, whereas 21.4% confirmed a homogenous sample. In RCM, a typical honeycombed sample was noticed in 57.1% of nevi. 42.9% of nevi confirmed a disarray of the dermis and presence of dendritic cells.
35.7% of all lesions introduced roundish atypical cells within the dermis. Roundish pagetoid cells within the dermo-epidermal junction have been detected in 14.2% of nevi. Non-edged papillae have been noticed in 50% of lesions. In every nevus, there have been dilated vessels. 50% of nevi revealed dense nests within the periphery, though in case of 1 lesion the dishomogeneous nests have been noticed. Furthermore, we are going to present how drive spectroscopy can be utilized to acquire the kinetic parameters, the dissociation panorama and the mechanical forces that keep flavoprotein complexes, together with the chance to particularly detect explicit flavoproteins on a pattern.
Tetrahydrofuran-Based Transient Receptor Potential Ankyrin 1 (TRPA1) Antagonists: Ligand-Based Discovery, Activity in a Rodent Asthma Model, and Mechanism-of-Action via Cryogenic Electron Microscopy
Transient receptor potential ankyrin 1 (TRPA1) is a nonselective calcium-permeable ion channel extremely expressed within the major sensory neurons functioning as a polymodal sensor for exogenous and endogenous stimuli and has generated widespread curiosity as a goal for inhibition resulting from its implication in neuropathic ache and respiratory illness. Herein, we describe the optimization of a collection of potent, selective, and orally bioavailable TRPA1 small molecule antagonists, resulting in the invention of a novel tetrahydrofuran-based linker. Given the steadiness of physicochemical properties and powerful <i>in vivo</i> goal engagement in a rat AITC-induced ache assay, compound <b>20</b> was progressed right into a guinea pig ovalbumin bronchial asthma mannequin the place it exhibited important dose-dependent discount of inflammatory response.
Furthermore, the construction of the TRPA1 channel certain to compound <b>21</b> was decided via cryogenic electron microscopy to a decision of three Å, revealing the binding website and mechanism of motion for this class of antagonists. Atomic drive microscopy (AFM) is among the most versatile instruments at the moment utilized in nanoscience. AFM permits for performing nondestructive imaging of virtually any pattern in both air or liquid, regardless whether or not the specimen is insulating, conductive, clear, or opaque. It additionally permits for measuring interplay forces between a pointy probe and a pattern floor, due to this fact permitting to probe nanomechanical properties of the specimen by both making use of a managed drive or pulling the pattern.
It can present topography, mechanical, magnetic, and conductive maps for very completely different sort of samples. Transferred to the sphere of biology, at the moment, AFM is the one microscopy method in a position to produce photos from biomolecules to micro organism and cells with nanometric decision in aqueous media. Here, we are going to give attention to the organic functions of AFM to flavoproteins. Despite references within the literature are scarce on this explicit area, right here it’s described how imaging with AFM can contribute to explain catalysis mechanisms of some flavoenzymes, how oxidation states or binding of related ligands affect the affiliation state of molecules, the dynamics of purposeful quaternary assemblies, and even visualize structural variations of particular person protein molecules.
Band Excitation Piezoresponse Force Microscopy Adapted for Weak Ferroelectrics: On-the-Fly Tuning of the Central Band Frequency
New curiosity in microscopic research of ferroelectric supplies with low piezoelectric coefficient, has emerged after the invention of ferroelectric properties in HfO2 skinny movies, that are the principle candidate for the following technology of nonvolatile ferroelectric reminiscence. The examine of the microscopic construction of ferroelectric HfO2 capacitors is essential to get insights into the machine conduct and efficiency. However, a small of ferroelectric HfO2 movies results in a low piezoresponse, particularly in band excitation piezoresponse drive microscopy (BE-PFM).
) Orcein Stain Kit (For Hepatitis B and Elastic Fibers) |
|
HBK-1 |
ScyTek Laboratories |
1 kit(s) |
EUR 239 |
Orcein Stain Kit (For Hepatitis B and Elastic Fibers) |
|
HBK-2 |
ScyTek Laboratories |
1 kit(s) |
EUR 144 |
, Red Fluorescence) EZClick? Palmitoylated Protein Assay Kit (FACS/Microscopy), Red Fluorescence |
|
K416-100 |
Biovision |
|
EUR 490 |
, Red Fluorescence) EZClick? Stearoylated Protein Assay Kit (FACS/Microscopy), Red Fluorescence |
|
K418-100 |
Biovision |
|
EUR 490 |
, Green Fluorescence) EZClick? Palmitoylated Protein Assay Kit (FACS/Microscopy), Green Fluorescence |
|
K452-100 |
Biovision |
|
EUR 490 |
, Green Fluorescence) EZClick? Stearoylated Protein Assay Kit (FACS/Microscopy), Green Fluorescence |
|
K453-100 |
Biovision |
|
EUR 490 |
, Green Fluorescence) EZClick? Myristoylated Protein Assay Kit (FACS/Microscopy), Green Fluorescence |
|
K497-100 |
Biovision |
|
EUR 490 |
 Holder for Plasmid Midi, Maxi and Maxi plus, Ion Exchange column |
|
FAPDE-holder-for-ion-exchange |
Favorgen |
1 prep |
EUR 158 |
, Green Fluorescence) EZClick? Global Protein Synthesis Assay Kit (FACS/Microscopy), Green Fluorescence |
|
K459-100 |
Biovision |
|
EUR 550 |
, Red Fluorescence) EZClick? Global RNA Synthesis Assay Kit (FACS/Microscopy), Red Fluorescence |
|
K462-100 |
Biovision |
|
EUR 533 |
, Red Fluorescence) EZClick? Global Protein Synthesis Assay Kit (FACS/Microscopy), Red Fluorescence |
|
K715-100 |
Biovision |
|
EUR 550 |
, Red Fluorescence) EZClick? Global Phospholipid Synthesis Assay Kit (FACS/Microscopy), Red Fluorescence |
|
K717-100 |
Biovision |
|
EUR 512 |
EZClick? Global RNA Synthesis Assay Kit (FACS/Microscopy), Red Fluorescence |
|
K718-100 |
Biovision |
|
EUR 533 |
) EZClick? O-GalNAc Modified Glycoprotein Assay Kit (FACS/Microscopy, Green Fluorescence) |
|
K560-100 |
Biovision |
|
EUR 490 |
 Modified Glycoprotein Assay Kit (FACS/Microscopy, Green Fluorescence)) EZClickTM Fucose (FucAz) Modified Glycoprotein Assay Kit (FACS/Microscopy, Green Fluorescence) |
|
K592-100 |
Biovision |
|
EUR 490 |
) EZClick? O-GlcNAc Modified Glycoprotein Assay Kit (FACS/Microscopy, Green Fluorescence) |
|
K714-100 |
Biovision |
|
EUR 512 |
, Red Fluorescence) EZClick? EdU Cell Proliferation/DNA Synthesis Kit (FACS/Microscopy), Red Fluorescence |
|
K946-100 |
Biovision |
|
EUR 533 |
 Modified Glycoprotein Assay Kit (FACS/Microscopy, Green Fluorescence)) EZClick? Sialic Acid (ManAz) Modified Glycoprotein Assay Kit (FACS/Microscopy, Green Fluorescence) |
|
K441-100 |
Biovision |
|
EUR 490 |
 Adaptor for flexible plates, accessory for AgileSealer? |
|
APS-200-FP |
ACTGene |
|
EUR 351 |
 Sample comb for batching for AE-6110 |
|
2398313 |
Atto |
unit |
EUR 100 |
|
Description: (90mm・r efer ence at t ached・1.5mm t i ck ness) |
 gelcaster for sequencer |
|
ESEQ1000-CAST |
Consort |
ea |
EUR 437 |
 Stand for D1000 |
|
BCM1237 |
Bio Basic |
1 pcs, 1 UNIT |
EUR 556.7 |
|
|
 Antibody for CD9 |
|
SPC-1272D |
Stressmarq |
0.1ml |
EUR 314 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is unconjugated. |
Antibody for CD9 |
|
SPC-1272D-A390 |
Stressmarq |
0.1ml |
EUR 361 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 390. |
Antibody for CD9 |
|
SPC-1272D-A488 |
Stressmarq |
0.1ml |
EUR 360 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 488. |
Antibody for CD9 |
|
SPC-1272D-A565 |
Stressmarq |
0.1ml |
EUR 360 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 565. |
Antibody for CD9 |
|
SPC-1272D-A594 |
Stressmarq |
0.1ml |
EUR 360 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 594. |
Antibody for CD9 |
|
SPC-1272D-A633 |
Stressmarq |
0.1ml |
EUR 360 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 633. |
Antibody for CD9 |
|
SPC-1272D-A655 |
Stressmarq |
0.1ml |
EUR 360 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 655. |
Antibody for CD9 |
|
SPC-1272D-A680 |
Stressmarq |
0.1ml |
EUR 360 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 680. |
Antibody for CD9 |
|
SPC-1272D-A700 |
Stressmarq |
0.1ml |
EUR 360 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to ATTO 700. |
Antibody for CD9 |
|
SPC-1272D-ALP |
Stressmarq |
0.1ml |
EUR 355 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Alkaline Phosphatase. |
Antibody for CD9 |
|
SPC-1272D-APC |
Stressmarq |
0.1ml |
EUR 359 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to APC . |
Antibody for CD9 |
|
SPC-1272D-APCCY7 |
Stressmarq |
0.1ml |
EUR 432 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to APC/Cy7. |
Antibody for CD9 |
|
SPC-1272D-BI |
Stressmarq |
0.1ml |
EUR 357 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Biotin. |
Antibody for CD9 |
|
SPC-1272D-DY350 |
Stressmarq |
0.1ml |
EUR 436 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Dylight 350. |
Antibody for CD9 |
|
SPC-1272D-DY405 |
Stressmarq |
0.1ml |
EUR 412 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Dylight 405. |
Antibody for CD9 |
|
SPC-1272D-DY488 |
Stressmarq |
0.1ml |
EUR 393 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Dylight 488. |
Antibody for CD9 |
|
SPC-1272D-DY594 |
Stressmarq |
0.1ml |
EUR 397 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Dylight 594. |
Antibody for CD9 |
|
SPC-1272D-DY633 |
Stressmarq |
0.1ml |
EUR 387 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Dylight 633. |
Antibody for CD9 |
|
SPC-1272D-FITC |
Stressmarq |
0.1ml |
EUR 353 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to FITC. |
Antibody for CD9 |
|
SPC-1272D-HRP |
Stressmarq |
0.1ml |
EUR 349 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to HRP. |
Antibody for CD9 |
|
SPC-1272D-P594 |
Stressmarq |
0.1ml |
EUR 367 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to PE/ATTO 594. |
Antibody for CD9 |
|
SPC-1272D-PCP |
Stressmarq |
0.1ml |
EUR 359 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to PerCP. |
Antibody for CD9 |
|
SPC-1272D-RPE |
Stressmarq |
0.1ml |
EUR 358 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to RPE . |
Antibody for CD9 |
|
SPC-1272D-STR |
Stressmarq |
0.1ml |
EUR 359 |
|
|
|
Description: A polyclonal antibody for CD9 from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with A synthesized peptide. The Antibody is tested and validated for WB, IHC, ICC/IF assays with the following recommended dilutions: WB (1:1000), IHC (1:200), ICC/IF (1:200). This CD9 antibody is conjugated to Streptavidin. |
 Antibody for KDEL |
|
SPC-109A |
Stressmarq |
0.05mg |
EUR 205 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is unconjugated. |
Antibody for KDEL |
|
SPC-109B |
Stressmarq |
0.2mg |
EUR 350 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is unconjugated. |
Antibody for KDEL |
|
SPC-109B-A390 |
Stressmarq |
0.2mg |
EUR 439 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 390. |
Antibody for KDEL |
|
SPC-109B-A488 |
Stressmarq |
0.2mg |
EUR 436 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 488. |
Antibody for KDEL |
|
SPC-109B-A565 |
Stressmarq |
0.2mg |
EUR 436 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 565. |
Antibody for KDEL |
|
SPC-109B-A594 |
Stressmarq |
0.2mg |
EUR 436 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 594. |
Antibody for KDEL |
|
SPC-109B-A633 |
Stressmarq |
0.2mg |
EUR 436 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 633. |
Antibody for KDEL |
|
SPC-109B-A655 |
Stressmarq |
0.2mg |
EUR 436 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 655. |
Antibody for KDEL |
|
SPC-109B-A680 |
Stressmarq |
0.2mg |
EUR 436 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 680. |
Antibody for KDEL |
|
SPC-109B-A700 |
Stressmarq |
0.2mg |
EUR 436 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to ATTO 700. |
Antibody for KDEL |
|
SPC-109B-ALP |
Stressmarq |
0.2mg |
EUR 425 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to Alkaline Phosphatase. |
Antibody for KDEL |
|
SPC-109B-APC |
Stressmarq |
0.2mg |
EUR 435 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to APC . |
Antibody for KDEL |
|
SPC-109B-APCCY7 |
Stressmarq |
0.2mg |
EUR 585 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to APC/Cy7. |
Antibody for KDEL |
|
SPC-109B-BI |
Stressmarq |
0.2mg |
EUR 427 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to Biotin. |
Antibody for KDEL |
|
SPC-109B-DY350 |
Stressmarq |
0.2mg |
EUR 471 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to Dylight 350. |
Antibody for KDEL |
|
SPC-109B-DY405 |
Stressmarq |
0.2mg |
EUR 448 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to Dylight 405. |
Antibody for KDEL |
|
SPC-109B-DY488 |
Stressmarq |
0.2mg |
EUR 428 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to Dylight 488. |
Antibody for KDEL |
|
SPC-109B-DY594 |
Stressmarq |
0.2mg |
EUR 432 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to Dylight 594. |
Antibody for KDEL |
|
SPC-109B-DY633 |
Stressmarq |
0.2mg |
EUR 422 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to Dylight 633. |
Antibody for KDEL |
|
SPC-109B-FITC |
Stressmarq |
0.2mg |
EUR 420 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to FITC. |
Antibody for KDEL |
|
SPC-109B-HRP |
Stressmarq |
0.2mg |
EUR 414 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to HRP. |
Antibody for KDEL |
|
SPC-109B-P594 |
Stressmarq |
0.2mg |
EUR 447 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to PE/ATTO 594. |
Antibody for KDEL |
|
SPC-109B-PCP |
Stressmarq |
0.2mg |
EUR 435 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to PerCP. |
Antibody for KDEL |
|
SPC-109B-RPE |
Stressmarq |
0.2mg |
EUR 429 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to RPE . |
Antibody for KDEL |
|
SPC-109B-STR |
Stressmarq |
0.2mg |
EUR 432 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is conjugated to Streptavidin. |
Antibody for KDEL |
|
SPC-109S |
Stressmarq |
0.012mg |
EUR 65 |
|
|
|
Description: A polyclonal antibody for KDEL from Human | Mouse | Rat. The antibody is produced in rabbit after immunization with KDEL containing peptide immunogen. The Antibody is tested and validated for WB, ICC/IF, IHC assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This KDEL antibody is unconjugated. |
 Antibody for Phosphoserine |
|
SPC-149F |
Stressmarq |
0.4ml |
EUR 362 |
|
|
|
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is unconjugated. |
Antibody for Phosphoserine |
|
SPC-149F-A390 |
Stressmarq |
0.4ml |
EUR 409 |
|
|
|
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to ATTO 390. |
Antibody for Phosphoserine |
|
SPC-149F-A488 |
Stressmarq |
0.4ml |
EUR 408 |
|
|
|
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to ATTO 488. |
Antibody for Phosphoserine |
|
SPC-149F-A565 |
Stressmarq |
0.4ml |
EUR 408 |
|
|
|
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to ATTO 565. |
Antibody for Phosphoserine |
|
SPC-149F-A594 |
Stressmarq |
0.4ml |
EUR 408 |
|
|
|
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to ATTO 594. |
Antibody for Phosphoserine |
|
SPC-149F-A633 |
Stressmarq |
0.4ml |
EUR 408 |
|
|
|
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to ATTO 633. |
Antibody for Phosphoserine |
|
SPC-149F-A655 |
Stressmarq |
0.4ml |
EUR 408 |
|
|
|
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to ATTO 655. |
Antibody for Phosphoserine |
|
SPC-149F-A680 |
Stressmarq |
0.4ml |
EUR 408 |
|
|
|
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to ATTO 680. |
Antibody for Phosphoserine |
|
SPC-149F-A700 |
Stressmarq |
0.4ml |
EUR 408 |
|
|
|
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to ATTO 700. |
Antibody for Phosphoserine |
|
SPC-149F-ALP |
Stressmarq |
0.4ml |
EUR 403 |
|
|
|
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to Alkaline Phosphatase. |
Antibody for Phosphoserine |
|
SPC-149F-APC |
Stressmarq |
0.4ml |
EUR 408 |
|
|
|
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to APC . |
Antibody for Phosphoserine |
|
SPC-149F-APCCY7 |
Stressmarq |
0.4ml |
EUR 480 |
|
|
|
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to APC/Cy7. |
Antibody for Phosphoserine |
|
SPC-149F-BI |
Stressmarq |
0.4ml |
EUR 405 |
|
|
|
Description: A polyclonal antibody for Phosphoserine from Species Independent. The antibody is produced in rabbit after immunization with Phosphoserine conjugated to KLH, and phosvitin mixture. The Antibody is tested and validated for WB, IHC, ICC/IF, IP, ELISA assays with the following recommended dilutions: WB (1:500), ICC/IF (1:50), ELISA (1:250), IP (1:100). This Phosphoserine antibody is conjugated to Biotin. |
In this work, we’ve carried out the BE-PFM method with an elevated scanning fee, thus bettering this versatile instrument for weak ferroelectrics. The acceleration of measurement was achieved by focusing excitation right into a slim frequency band and tuning the central frequency on-the-fly utilizing a web-based real-time mannequin estimation by becoming a posh BE response. The monitoring of the contact resonance frequency was carried out utilizing a pure mechanical cantilever response acquired in BE atomic drive acoustic microscopy. To receive optimum excitation parameters, we carry out statistical evaluation by minimizing estimator variance. The measurement precision of a number of PFM methods was in contrast each by the simulation and experimentally utilizing a Hf0.5Zr0.5O2-based ferroelectric capacitor.
